Laser projectors for production of nailed timber truss

Laser projection systems display outlines for positioning beams and nail plates during fabrication of timber truss. The visible templates increase the speed of manual placement.

Increase the throughput of elements for roof construction, bridges or similar objects by using projected laser templates for assistance. Mark the position for assembly steps with sub-millimeter precision.

Our solution for timber truss production

Laser templates will streamline manual steps in your workflow and support the final completeness check.
Projected outlines will show you where to place stops and clamps, lumber, and connector plates on your production tables. Assembly jig, timber, and nail plates can be highlighted in different colors. For large tables, a virtually unlimited number of projectors can be joined together. LAP's laser outline projectors are capable of multitasking: you may work on several jigs of the same or different batches on the same table independently.

Each truss will be displayed true to scale with ± 0.2 mm (1/64") precision. The parts to be placed will be shown at the right place in the required order. There is no need for measurement, squaring, stringing, or printed truss assembly plans. Even new and unskilled assemblers and your least experienced workers will be productive in no time.

Using timber truss projection systems may reduce your setup time by up to 70% and increase your throughput by up to 30%. Frequent setup changes are no longer a cause for concern. Especially small batches and individual, custom-built constructions will be assembled faster and with less risk of errors.

LAP partners with RANDEK.

Play Video

Application: NP Nilsson, Sweden

Laser projection for wooden roof truss production

Your benefits

Reduced setup time

Visible laser outlines replace measuring tapes and physical templates. Instead of color markings or limit stops, the CAD data is projected directly onto the work surface.

Faster work steps

No delay. As you don't have to measure or mark, you can start with the appearance of the laser lines. At large installations, workers can start at several places simultaneously.